Hydraulic Tankless Water Heater Thermoflow Hydrex 18 Water. The description of this item has been automatically translated. Hydraulic instantaneous water heater Thermoflow Hydrex 18N water heater new. If you have any questions about the item, please always specify. Do you have any questions about this article?Rated power 18 - kW. Flow pressure 0.1 - 0.6 MPa. Minimum fuse 18 kW = 26-32 A. Voltage 400 volts 3 50 Hz.
Minimum Cable cross-section 4 mm². Nominal pressure 0.6 Mpa. Switch-on quantity 2.5 L/min. Temperature range 0°C - 75°C.Dimensions HxWxD 47.5 x 25.5 x 11.5 cm. All special precautions to be taken when assembling, installing or maintaining the water heater are described in the instructions for use and assembly. Read and follow the operating and installation instructions. A 400V high-voltage connection (three-phase alternating connection) is required for the installation of this device. The assembly (water and electrical installation) as well as the initial commissioning and maintenance of this device may only be carried out by a qualified electrician in accordance with the applicable regulations and in accordance with these instructions to be executed!
Devices that are not ready to plug in must be installed by the network operator or by a registered specialist company, who will also help you to obtain the network operator's approval for the installation of the device. Only possible in Germany and only for goods that can be sent as a parcel. Pay in cash when picking up the goods from our warehouse. This is valid, if we send more packets.
Dies sind die allgemeinen Versandkostenangaben. Bei abweichenden Versandkosten im Angebot sind die Preise gültig, die für das Angebot hinterlegt sind. Please note our general terms and conditions with customer information and data protection declarations. Allen of our items are new. Please note our obligation to take back batteries and rechargeable batteries in the general terms and conditions.As a consumer, you have a right of withdrawal. You can find more detailed information on this in the general terms and conditions. You can reach us at any time of course.
There is also the possibility of a personal pick-up on site. Our opening hours are from Monday to Friday from 8 a.Articles to protect your health. Don't miss any more offers! Rated power 18 - kW - Flow pressure 0.1 - 0.6 MPa - Water connection G 1/2 - Minimum fuse 18 kW = 26-32 A - Voltage 400 volts 3 50 Hz - minimum Cable cross-section 4 mm² - Type closed - Nominal pressure 0.6 Mpa - Switch-on quantity 2.5 L/min. Inlet temperature 20°C - Temperature range 0°C - 75°C - Dimensions HxWxD 47.5 x 25.5 x 11.5 cm - Weight: 4.5 kg All special precautions to be taken when assembling, installing or maintaining the water heater are described in the instructions for use and assembly. Usage notice: - A 400V high-voltage connection (three-phase alternating connection) is required for the installation of this device. The assembly (water and electrical installation) as well as the initial commissioning an. This item is in the category "Home, Furniture & DIY\Heating, Cooling & Air\Heaters & Radiators\Water Heaters\Standard Water Heaters". The seller is "1a-handelsagentur" and is located in this country: DE.
This item can be shipped to United Kingdom, European Union.