Electronic Durchlauferhitz Er ELEX18 Thermoflow 687

  

The description of this item has been automatically translated. Electronic CONTINUOUS HEATER ELEX18 Thermoflow 687. Please always specify if you have any questions about the item. Do you have any questions about this article? Flow pressure 0.1-0.6 MPa.

Minimum protection 18 kW = 26-32 A. Voltage 400 volts 3 50 Hz. Nominal pressure 0.6 Mpa. Switch-on quantity 2.5 L / min.

Inlet temperature 20 ° C. Temperature range 0 ° C - 75 ° C. Dimensions HxWxD 25.5 x 11.5 x 47.2 cm. A 400V high-voltage connection (three-phase alternating connection) is required for the installation of this device, the assembly (water / and electrical installation) as well as the initial start-up and maintenance of this device may only be carried out by a qualified electrician in accordance with the applicable regulations and in accordance with these instructions be executed! Devices that are not ready to be plugged in must be installed by the network operator or a registered specialist company who will also help you obtain the network operator's consent for the installation of the device.

You can find the bank details in the checkout process. Only possible in Germany and only for goods that can be sent as parcels. This is valid, if we send more packets. The prerequisite is the same address and everything is paid for in one go. Dies sind die allgemeinen Versandkostenangaben. Bei abweichenden Versandkosten im Angebot sind die Preise gültig, die für das Angebot hinterlegt sind. Please note our general terms and conditions with customer information and data protection declarations. Allen our items are new. Please note our take-back obligations for batteries and rechargeable batteries in the general terms and conditions.

As a consumer, you have a right of withdrawal; you can also find more information on this in the general terms and conditions. You can reach us at any time of course. There is also the option of personal pick-up on site. Our opening times are from Monday to Friday from 8 a.

Articles to protect your health. Don't miss any more offers! Item number: 00687 Electronic water heater Nominal power 18 kWFlow pressure 0.1-0.6 MPaWater connection G 1/2 Minimum protection 18 kW = 26-32 AVoltage 400 volts 3 50 Hzmin. Cable cross-section: 4 mm²Closed designNominal pressure 0.6 MpaSwitch-on quantity 2.5 L / min. Inlet temperature 20 ° CTemperature range 0 ° C - 75 ° CDimensions HxWxD 25.5 x 11.5 x 47.2 cm Usage notice: - A 400V high-voltage connection (three-phase alternating connection) is required for the installation of this device, the assembly (water / and electrical installation) as well as the initial start-up and maintenance of this device may only be carried out by a qualified electrician in accordance with the applicable regulations and in accordance with these instructions be executed!

- Devices that are not ready. 400 Volt 3 50 Hz. This item is in the category "Home, Furniture & DIY\Heating, Cooling & Air\Heaters & Radiators\Water Heaters\Standard Water Heaters". The seller is "1a-handelsagentur" and is located in this country: DE. This item can be shipped to United Kingdom, European Union.

1. Brand: Thermoflow
2. Power Source: Network Operation
3. Type Of Energy: Electronic
4. Particle Board Nung: 400 volts 3 ~ 50 Hz
5. Type: Tankless Water Heater