You can enjoy outdoor shower, bath your horses, wash your pets with this portable camping gas shower. Unlike the storage water heater, this tankless water heater only heats the water in amount for you need. No need to be preheated, thus eliminating the waiting time for hot water.
MULTIPLE PROTECTION- Flame failure protection, overheat protection, oxygen depletion safety shutoff protection to ensure your family safety. Drain plug is applied to drain off the entire water content when it is not used for so long or outside temperature is near or below 0? EASY TO INSTALL & USE- The portable water heater is equipped with a folding handle for easy carrying whenever you go for camping tours in remote areas. You can directly hang it with the handle or mount it with the provided installation kits, on the trailer, RV, caravan and even a trolley.It is ignited by 2 "D" size batteries, thus it can be used as a backup in such areas where there is no electricity supply. PLEASE NOTICE - We provide a 37mbar CE approved gas regulator (in red) for quick installation to the propane gas cylinder. Please be aware that the gas regulator provided is only compatible with the propane gas bottle with 27mm clip on connection. If your cylinder cannot meet this standard, another gas regulator is needed. With the most compact design, the Camplux.
Gas shower is convenient to use by the pool, in the garden and on campsites. Enjoy endless hot water instantly wherever you are.
Ignited by 2 "D" cell batteries and no main power required. The operating range of the applied water pressure for the gas shower is 0.25 to 7.5 bar and works without any problems with excellent performance. The operating gas pressure is 37 mbar with a maximum output of 10 kW. Standard gas regulator for propane or butane gas bottles is included.
Camplux water heater comes with everything to set up the system for use. The system also works great on modified water systems with a 12 volt water pump.
PLEASE NOTE - Use a torque wrench to connect the gas regulator and gas inlet brass fittings to a torque between 20-28 Nm. Hot water output: 5L / min. Overheating protection: at 80 ° C. Propane gas or butane gas suitable. Nominal pressure: 37 mbar for propane gas or 30 mbar for butane gas.
Applicable water pressure: 0.25 7.5 bar. Water connection nuts: 1/2 BSP.Gas connection nut: 1/2 BSP. Product weight: 4.54 kg. Product size (WxDxH): 29 x 11x 37.6 cm.
Easy to install and use. Mount the gas water heater on the wall using the mounting kits supplied. Connect the shower hose to the hot water outlet. Connect the water hose to the water inlet. Connect the gas regulator to the gas bottle.
Carefully inspect gas leaks by spraying soapy water on the connections. Insert 2 "D" size batteries. Open the gas valve and turn on the shower head, water flows, water heater turns on automatically, hot water comes out immediately.